Featured Post

The TKTalkie v4 - Press 6 for the Imperial March

Upgrading - the Path from v3.15 to v4.0 (Note: I had started this draft last year but never finished it, due to personal issues and cuttin...

Showing posts with label blaster. Show all posts
Showing posts with label blaster. Show all posts

Wednesday, October 12, 2016

Repainting the Disney E-11 Stormtrooper Blaster

Halloween isn't too far away, but if you're looking for a kid-friendly blaster for your ANOVOS armor this Halloween, it's not too late to get one ready.

The Disney E-11 electronic Stormtrooper blaster is a good place to start. You can find them on Amazon being sold by Disney Merchandise themselves, or from third parties on eBay. They're no longer sold in Disney Parks; from what I know, you can only purchase them online. The original MSRP on these was $24.99 if memory serves, so keep that in mind when purchasing one from a third party as to not get too badly fleeced (but keep in mind that prices my include shipping costs from these sellers).

Edit 2017-02-01: this blaster is now quite expensive, and getting it for less than $100 is a steal. If you don't need the sound and light FX, you may be better off spending $150 on a HyperFirm B-Grade blaster.


Although the blaster is cool, its white color sticks out like a sore thumb on an otherwise screen-accurate costume. I'm going to discuss repainting the blaster to better match the costume, while retaining some of the safety orange features that let others know it's not a dangerous item.

Obviously, retaining the orange features don't make it as screen accurate as possible, but I already have a HyperFirm blaster for screen accuracy. Making the Disney blaster screen accurate, or spending money on 3D-printed third-party parts, wasn't my goal. Other troopers on whitearmor.net have done these things and more if you want to search the forums there for additional information. I'll elaborate more on this at the end of the post.

For now, I'll discuss the steps I took to repaint my Disney E-11 blaster. Because I did the repaint several months ago for a birthday party for my cousins-in-law's son (while simultaneously working on improving my bucket), I didn't take any pictures of the actual process, but will describe the steps I took using pictures and disassembly of my already-painted Disney E-11 blaster.
  • Cut off the orange tip
For me, there was no easy way around this. Other troopers were able to twist off the orange tip with little effort, but when I tried to twist the tip from mine, it started cracking the front of the barrel, which required a little repair with CA glue to fix. If the tip won't twist off, I recommend a coping saw or a Dremel with a wide cutting disk (which is what I used). I stored the orange tip in a baggy.
  • Removed all the screws
As you're holding it, on the left side of the blaster, there's only one screw for the battery box.


All the structural screws are located on the right side of the blaster; there are 9 in total. All the screws are the same length, which makes reassembly easier.


I stored the screws in the same baggy as the orange tip.
  • Started to disassemble the blaster
Once the screws were out, the blaster came apart with very little effort. The barrel rail, scope and orange trigger came off easily. I didn't paint the trigger and bagged it with the screws and orange tip. The pistol grips were also easily removed at this point as they're secured by the removed screws and slip-in tabs. I decided to not paint these as the paint would wear off easily from these parts anyhow, and bagged them as well. 

  • Removed the barrel rails, scope, trigger, and grips 
The barrel rail, scope and orange trigger should came off easily. I didn't paint the trigger and bagged it with the screws and orange tip. The pistol grips were also easily removed at this point as they're secured by the removed screws and slip-in tabs. I decided to not paint these as the paint would wear off easily from these parts anyhow, and so I bagged them as well. 

The same is true for the rest of the barrel rails. Although I wasn't going for complete screen accuracy, I knew that the original E-11 props were modified guns with plastic drawer guides added as rails to the barrels, and therefore wouldn't have any worn black paint with metal showing through, again because they were plastic on the originals (edit: thanks for the corrected info Kalani!). Because of this and because paint would wear off of these parts easily, I decided to remove them from the blaster and not paint them. Taking them off isn't very tricky; I simply used a flat screwdriver to release the clips from the inside of the blaster (be careful as the clips are fragile and tend to snap if too much pressure is applied. I bagged these with my other loose parts.

  • Removed the clear inserts inside the barrel
I obviously didn't want to paint these because I wanted to retain the lighting effects of the blaster after the repaint. These were held in with two screws each. They're a different length from the other screws and should be stored separately. The insert on the right side is easy to remove, but the one on the left side has the rear screw covered by a PCB with the dual-color LEDs attached to it. This is held in place by its own screw. I simply unscrewed the PCB, finished uninstalling the insert, and then screwed the PCB back in place. 



Speaking of which, to do the repaint, it's not necessary to remove the electronics for the repaint. You're more likely to damage the electronics of you try to remove them - especially the leads for the battery box. I'll discuss these parts more later.
  • Sanded off the insignia and lightly sanded the surface of the blaster to increase paint adhesion
I've no pictures of this, but basically the Disney blaster has a big Imperial sigil on it. There may be one on each side; I can't remember.


I carefully sanded this down by hand. Also, I lightly sanded as much of the blaster as I could, including the scope, in order to get better adhesion for the paint. After sanding, I wiped down the blaster to help remove dust from sanding.
  • Masked the electronics
Instead of removing the electronics, I simply used masking tape to cover them up during the repaint.
  • Painted the ejection port gunmetal, then masked it with painter's tape
For the ejection port, I actually started painting the blaster with gunmetal spray paint, but just on this area. After the paint had thoroughly dried (at least several hours), I covered the port with painter's tape and carefully traced the edge with a hobby knife so that only the port was masked. I then carefully pressed down the edges of the mask to ensure that black paint wouldn't penetrate the mask.

  • Painted both sides of the blaster and other parts flat black
I picked up these paints from Home Depot:


I first used the flat black paint & primer on the two sides of the blaster and the scope. I made sure to turn the pieces in-between coats before applying the next coat, to ensure all the edges are painted. The last thing I wanted was to assemble the blaster and discover that there was an under-painted edge, especially where the pieces mated. 

I painted the left side with the battery box cover in place as to not paint the inside of the battery box and compromise the contacts. I also moved the blast/ stun switch between coats to ensure that both sides of the switch were painted.

* Be sure to read the instructions on the spray can for proper application and reapplication.
  • Dry brushed gunmetal details on the raised edges
Instead of painting the blaster gunmetal, then black, and then sanding some edges to show the metal (which can be tricky, especially if a place gets over-sanded down to the plastic), I decided to use an old miniature-painting trick and use a drybrush technique, which basically involves dipping the brush in paint, removing a lot of the paint by brushing a paper towel, and then leaving the brush mostly dry to paint along raised edges. I did this using a Testor steel paint for the blaster halves, and a Testor brass color for the scope.




Make sure to also dry brush the battery box cover so that it matches the rest of the faux ammo counter and the rest of the blaster.

It's not perfect, but very nice for something I just plan to pal around with for the kids.
  • Applied satin coat
Finally, after allowing all the paint an ample amount of time to dry, I applied a satin coat to normalize the flat black and glossy highlights to a uniform, semi-gloss sheen as seen on typical E-11 blasters.

* Be sure to read the instructions on the spray can for proper application and reapplication.
  • Removed masking tape and reassembled
Once all the paint was more than dry, I basically reversed my disassembly to reassemble the blaster.




I also put the orange tip back on by gluing a plastic pen cap onto is inside and using that to glue it back onto the blaster using good 'ole E6000 (in case I need to take it back apart again, like for making a blog post :P ). As mentioned earlier, I'm keeping the orange hardware to let others during Halloween and parties know it's not the real deal.



Regarding the Disney Blaster and 501st Approval

In the US, a blaster is NOT required for 501st Basic Approval.

* Because the UK garrison was a separate club that was absorbed into the 501st, they have different rules and do require a blaster for basic approval. I can't speak to if a repainted Disney blaster will work for approval, but given what I know of their strict standards, I doubt it.

Some have asked if the Disney blaster could be modified for Centurion approval. On that, I'm not certain. Size is the main issue. Even with 3D printed parts, the blaster isn't as full-sized as screen-used E-11s or props cast from molds created from them. It would be good enough for Basic approval, and might be good enough for EIB certification, but perhaps not Centurion - although I can't say for sure if anyone has tried for Centurion with a modified Disney E-11.

Top: Disney E-11; Bottom: HyperFirm/ HFx E-11 Elite

So that's it for this entry. Next, I plan to finish modifying my ab/ kidney/ posterior armor for better no-gap fit and eventual certification for EIB and Centurion. Until then...

Monday, May 16, 2016

First Troop and the HyperFX E-11 Blaster

With the thighs now fixed, it was time to take the armor out for its first practical test drive. And the best way to do that was by doing what I signed up for in the first place - trooping with the 501st :)

Before I talk about that, though, I'll talk about the E-11 blaster I got from my squad's group purchase. The Southern California Garrison OC Squad did a gorup buy of over 15 blasters and 15 DLT-19s from HyperFirm/ HFx (http://www.facebook.com/HFx-Productions-1669859386576227/). This allowed us to get the Elite version for a lower cost.I received mine on May 1st, a few days after our squad coordinator received them. Their Elite version has more screen accurate power cylinders (the greeblies on top of the magazine feed), a mounted D-ring (required for Centurion blasters) and a generally cleaner look. Forgive the messy desk in the pictures as I was showing it off to colleagues.





For the ANOVOS holster, it's pretty easy to scrunch the thing by pressing the two lengthwise edges carefully towards center, until the opening is big enough to accommodate the blaster. Alternately, shoving a glass soda or beer bottle into the holster and leaving it there for a few days to stretch the opening can also help. The retaining strap is big enough to easily accommodate my blaster.

Ironically, the troop I went to on Friday May 13th did no allow blasters, so the Elite stayed at home. However, I don't chagrin this. As it is, May 13th is the birthday of Albin Johnson's late daughter Katie, so it was an honor to be able to do my first troop that day, for the kids of Highland Elementary in Norco, CA, for their PTA Country Fair.

In the future, I may make a separate blog for trooping, but I've included my experience from my first troop for ANOVOS builders wondering about the experience, and how my armor held up. Mind you, this was only a short 1.5 hour troop for me, with 1 hour prep time after travel.

I got to troop with my fellow ANOVOS ANH Stormtrooper rookie Teri, as well as a few veterans from the Inland Empire Squad and a couple of members from the Rebel Legion. For the sake of the privacy of attendees and troopers, I took no pictures of the staging area or event, but our wrangler took some pictures of the event.




Teri's a little shorter than I, but I also differentiated myself by using my orange pauldron, a gift from a coworker when he discovered I was going to put this armor together.

Each event is different, and the POC will check with the requesting party to see if there will be a changing/ staging/ break area, refreshments for troops, parking, if blasters are allowed, etc. In our case, all the above was available, but they requested no blasters as the event was at a school. 

The prep space was more than large enough for the five of us from the 501st and the two members of the Rebel Legion. Everyone arrived on or just after call to suit up. Everyone had their bins set up to pull out their armor and replace the contents with their day clothes during trooping. It was interesting seeing the different hard armor kits, especially for the guys dressing as Rex and Cody. The Sandtrooper (TD) also had a different kit, so it was interesting to look at the differences up close.

There were also plainclothes members acting as wranglers, who help direct troopers and make sure the troopers are OK (and that unruly kids behave around the troopers!), as well as some plainclothes "bounty hunters" manning the small Star Wars themed jail that was part of the Fair (I had a similar experience being "captured" at Star Wars Celebration by Mandalorians).

As far as my armor was concerned, I had some issues with the head strapping, especially after my bucket took a thump from behind from one ballsy boy, which cause the H&L to separate from the helmet (which required me to duck back into the prep room to re-secure (with the help of some masking tape I brought for any emergencies). Also, the left thigh was actually low, which I dealt with and fiddled with until we took our break, at which time I was able to remove my left shin, un-snap the strap from my belt, remove and re-place the H&L tab farther down the thigh pieces, snap it back into place, and put my left shin back on. It's one major advantage of the H&L system - being adjustable on the fly. Other than that, I had zero issues, and the fan system worked well also.

I had to leave the troop a half hour early to make it to my own kid's school open house, but I had a lot of fun with the troops from the IE Squad and look forward to trooping with them again.

I also had an Orange County Squad armor party the next day, where I polished my thighs a little more. There was a very small crack on the edge of my left thigh where I put some ABS paste to re-create the armor thickness, but it should be easily fixed. Otherwise, I say no significant damage to the armor. Consensus from my squad mates and the guys from the IE Squad was that the thighs looked great considering the shimming I'd done, so I'll take that as a sign of a good repair (along with the comments I've received on FB from the ANOVOS builders group).

To eliminate the H&L issues with the helmet, my next step will be to take out the helmet hardware so I can finally PlastiDip the inside of the helmet after copiously, tediously applying masking tape to protect the parts I don't wish to paint. Once that's completed, I can replace the ANOVOS H&L tape inside the helmet with higher-quality tape, as I actually like the rebuilt harness they included with the helmet. I'll leave that for (hopefully) my next blog update.